Digital cluster retrofit — Audi B8
Audi A4 Digital Cluster Upgrade
The B8 A4 - millions of cars, and the one place buyers get the wrong kit, because the B8 and B8.5 bezels are not interchangeable. A 12.3" 1920 x 720 panel, integrated replacement for the 2008-2012 cars: plug-and-play harness, CAN bus plug-in, no coding — and because the original mainboard stays in the car, mileage and service data are the car's own.
What you get
- 1920 x 720 Linux panel, 3-second boot from ignition
- Original cluster mainboard retained — every value on screen is read from the car, not copied
- Wireless CarPlay, Android Auto and Huawei HiCar
- 8 themes (9 on Audi builds), 12 languages
- No flashing, no coding, no wire cutting
- Plug-and-play harness and CAN bus plug-in - the car's own data is read over the bus, nothing is coded
What it looks like
Fitment at a glance
Everything in this table comes from the fitment we quote from — if your car does not match a line, we will tell you before you order rather than after.
| Chassis | Model years | Panel | Factory platform | Fitment type |
|---|---|---|---|---|
| B8 | 2008-2012 | 12.3" | MLB | Integrated replacement |
If the car has already been upgraded to the B8.5 one-piece bezel, order the B8.5 kit instead. Send us a photo of the bezel and we confirm which one you need.
Questions on this chassis
How do I know if my car is B8 or B8.5?
Look at the bezel around the cluster: the B8.5 uses a one-piece frame, the B8 does not. Send us a photo and we will tell you which kit to order - this is the single most common mix-up on Audi clusters.
Can I convert a B8 car to the B8.5 look?
Only by fitting the B8.5 bezel as well. If the car already has it, order the B8.5 kit; if it does not, the B8 kit is the right one.
Can I test one unit first?
Yes. One unit ships at the same unit price as any larger order, nothing commits you to a second order, and a test unit leaves the factory in 3-7 working days.
Is coding or an odometer setup needed after fitting?
No. The original cluster mainboard stays in the car, so mileage, service intervals and warning data are the car's own. Nothing is coded, flashed or reset.
Will it fit the car in front of you?
Two questions and a photo is usually all it takes. The checker answers from the same table we quote from.
How it mounts
Integrated replacement — B8
The cluster body is replaced outright with the new panel and the original mainboard is transferred into it. The binnacle keeps its factory position, the original trim frame is reused, and the car's own data feeds the new screen because the logic board never leaves the car.Time in the bay. Ten minutes. The cluster goes onto the factory connector through a plug-and-play harness, so there is nothing to code and no odometer to set up. A shop that swaps the cluster board instead keeps the car in the bay for 90 minutes or more, then adds flashing, coding and a mileage correction on top.
Platform
| Panel size | 12.3" on this model |
|---|---|
| Platform | Linux, quad-core with 8 GB of memory and a dedicated GPU |
| Boot time | 3 seconds from ignition to a usable cluster |
| Panel | 1920 x 720 (12.3") |
| Theme interfaces | 8 UI themes; Audi-specific builds carry 9 |
| Languages | 12 |
| Smartphone integration | Wireless CarPlay, Android Auto and Huawei HiCar |
| Fitting | Plug-and-play with no wire cutting, no flashing and no coding |
| Working temperature | -35 C to +80 C |
| Mainboard | Retains the original cluster mainboard, so every value on screen is read from the car, not copied |
| Software | OTA updates and remote protocol work done with you on the phone |
| Warranty | 3 years against manufacturing defects |
Trade terms for this chassis
- Testing first
- One unit at the same price, no commitment to a larger order
- Lead time
- 3-7 working days
- Payment
- 30% T/T deposit, balance before shipment
- Incoterms
- EXW, FOB or CIF - your choice
- Warranty
- 3 years, repair or replace
- Documents
- Tell us what your market requires and we confirm model by model before you order
A single unit can be ordered as a test sample on the same terms. Packing dimensions and gross weight are on trade terms & packing. Pricing depends on the model and your volume — send the chassis code and the quantity and we confirm a firm figure the same working day.
Need this model confirmed today?
Send the chassis code and the factory system and we come back with fitment, lead time and the freight figure.
Send the chassis code